WKTHERM SMART Screw-In Insulation Anchors

USAGE:

The WKTHERM-S is a versatile screw-in anchor suitable for all types of base materials. It is designed for securing insulation materials such as Expanded Polystyrene (EPS), Extruded Polystyrene (XPS), and mineral wool, ensuring a robust and dependable installation in both new and renovated structures.

Category:

ENG PDF Product Sheet ENG PDF Declaration of Performance ENG PDF Installation Guide ENG

Anchor Diameter (mm) Lenght (mm) Packaging (pc)
WKTHERM – S08095 8 95 200
WKTHERM – S08115 8 115 200
WKTHERM – S08135 8 135 200
WKTHERM – S08155 8 155 200
WKTHERM – S08175 8 175 200
WKTHERM – S08195 8 195 200
WKTHERM – S08215 8 215 100
WKTHERM – S08235 8 235 100
WKTHERM – S08255 8 255 100
WKTHERM – S08275 8 275 100
WKTHERM – S08295 8 295 100

ADVANTAGES:

  • Very low point thermal conductivity (0.002W/K) due to a plastic seal on the metal nail head, enhancing the overall thermal performance of the insulation barrier.
  • Protection against corrosion thanks to the plastic seal covering the metal nail head.
  • Easy and convenient installation with a flush or recessed mounting option.
  • Ideal for use in brittle materials where avoiding material damage during installation is crucial.
  • The screw-in nail design ensures superior strength parameters.
  • TORX 40 bit suitable for anchor installation, simplifying the process.
  • The textured imprint on the anchor plate enhances the bonding ability with adhesive mixtures, ensuring a firm hold on insulation materials.
  • The anchor plate’s higher rigidity provides better support and hold of insulation material.
  • Short fastening (diameter 8 mm) offers maximum anchor strength with minimal labor and equipment cost.

INSTALLATION:

Drill a hole into the base material to the specified depth, ensuring a clean and precise bore.

Position the insulation material over the hole.

Insert the Klimas WKTHERM-S anchor through the insulation material into the hole, ensuring a flush or recessed installation as per requirement.

Utilize a TORX 40 bit to screw in the anchor securely until the anchor plate sits firmly against the insulation material.

Ensure the anchor is installed correctly with no movement and the insulation material is firmly held in place.

MATERIAL:

  • Anchor Material: Carbon Steel
  • Nail Material: Carbon Steel with a glass-filled nylon coated head
  • Anchor Plate: Designed with a textured imprint for better bonding ability

Related Products

Scroll to Top